A. First, unplug your temperature control unit. Next, insert your garden hose with waterbed hose connector into the “popped-up” valve, as pictured.

B. Weight down the area around the valve with a few heavy objects, such as telephone books. This step will help prevent air bubbles inside the mattress from getting into your garden hose and stopping the siphoning action you will

create.

C. Mount your drain pump to your closest faucet and attach your garden hose. make sure your fittings are tight. With the “bell valve” in the “up” position, turn on the water to put more water in the mattress. This step pushes the air in your

hose into your bed so you can create the continuous water siphon you need. (If you don’t have a drain pump, see below

for further instructions.)

D. Once water is flowing into the bed for a few second, turn the “bell valve” to the “down” position, leaving the water flowing full blast. The water from your faucet flowing through your drain pump will suck the water out of your bed. This will take one or two hours depending on water pressure. Do not allow air to get in the hose.

E. ROLL YOUR MATTRESS LIKE A CARPET OR FOLD CAREFULLY. DO NOT LET THE BAFFLES SHIFT OUT OF PLACE.